DRIFT RC


Tamiya 1/10 XB Volkswagen Beetle 






HARGA 1.200.000

SPECIFICATION
Length: 397mm
 Width: 163mm
Height: 145mm
Wheelbase: 239mm
Tire Width / Diameter: (Front / Rear) 25/59mm
Frame: monocoque Type
Drivetrain: Rear Wheel Drive
Diff. Gear: 3-bevel
Steering: Extra Long 2-piece Tie Rod
Suspension: 4-wheel Double Wishbone
ITEMS INCLUDED
Car body x 1
Transmitter x 1
Items required to run the car:
Tools
8 x AA batteries
Battery Pack
Charger


RC Drift RTR HL518 1/10





HARGA 1.500.000

Belt System with RTR 1:10 
Transmitter = Yes 
Brushed Motor = 
NI-MH Battery = 1800mAh 
) 540K class big power motor 
2) 320A class electron steeples speed controller 
3) 7.2V, 1800mAh Ni-mh battery pack 
4) 4WD driven all time belt system 
5) Front / rear wheel driven all setup alloy adding rigidity differential pulverous gear 
6) The mode of hydraulic pressure aluminum alloy shock absorber 
7) Aluminium alloy chassis, and Carbon Shock Tower 
8) antiskid and abrasion proof rubber tire 
9) Full ball bearing used through the car 

Includes: 
* Full Function Radio Controlled Electric Car 
* Remote Controller with Receiver 3ch 
* Rechargeable NIMH Battery 1800mAh 7.2 
* Battery Charger AC Adapter 
* Instructions Manual 
* Accessories 

HSP Sonic Nitro Engine 4WD RTR 16cxp 1/10




HARGA 1.700.000

HSP Sonic Nitro Engine 4WD RTR 16cxp 1/10
Features: -
1/10 Scale Nitro 4WD Race Car
Vertex .16 Nitro Engine Pull Start
Lightweight 13.8g Flywheel
Countersunk 2.5mm 6061 Anodized Aluminum Chassis
Dual Element High Flow Air Cleaner
56mm Factory Tuned Exhaust
Adjustable Ride Height
Adjustable Down Stops Front and Rear
100% Fully Assembled
4 Wheel Drive
Front and Rear Ball raced 5 Screw Differentials with Metal Bevel Gears
75cc Pressurised Fuel Tank
Full 4 Wheel A-Arm 100% independent Adjustable Suspension
Double Wishbones
Aluminium Cap Oil Filled Adjustable Shock Absorbers
Adjustable Height
Adjustable Toe-in
Adjustable Caster
Adjustable Toe In, Toe Out
New Even Lighter Smaller Front and Gear Boxes
Ultra Low Profile Tyres
Powerful Disc Braking with replaceable Pads
Factory Installed Servo Saver
2 Channel Pistol Grip Radio Factory Installed

Package Includes:
* Transmitter & Receiver
* 1:10 RTR nitro engine car
1-Glow Plug Battery,
2 - Nitro Fuel
3 - 8nos x AA Batteries for the transmitter



drift OTA R31 Nissan Z370 Boddy (RTR) 1:10



HARGA 2.200.000

SPECIFICATIONS OTA R31

- OTA R31 Replica Chassis
- Body Nissan Z370 brand Pandora (open cabin)
- EZRUN Brushless Motor 4000kv 8.5 T
- 60A EZRUN esc
- 7.4V 5000mAh LiPo Battery
- Remote 2.4GHz Flysky GT2
- Sensor Lightning 7 Option
- Include Charger
- Belting System Operation
- Drifting Wheels 32mm Chrome


tamiya TA06 PRO Body Mazda Furai (RTR) 1:10


HARGA 2.600.000

SPESIFIKASI TA06 Pro

- Chassis TA06 Pro
- Motor Brushed Cuprace
- Battery 7,2V 3600mah NIMH
- esc HSP
- Servo Steering COreless
- Remote Flysky GT2 2 Channel
- Include Lightning



TAMIYA XB Coppermix Nismo Silvia (TT-01D) Drift 1:10 scale  RTR






HARGA 1.500.000

Specification:
● Length: 444mm
● Width: 187mm
● Height: 132mm
● Wheelbase: 257mm
Drift ● Tire Width / Diameter: (Front & Rear) 26/63mm
● Frame: Bathtub Type
● Drivetrain: Shaft-driven 4WD
● Diff. Gear: Front / Rear 3-Bevel
● Steering Rod: 3-piece
● Suspension: 4-wheel Double Wishbone
● Dampers: CVA mini shock dampers oil
● Gear Ratio: 8.35:1
● Motor: Type RS540
● Full Ball Bearings Speed ​​Controller: TEU-101BK ESC included


Tamiya 1/10 Datsun 240Z Drift RTR




HARGA 1.500.000

Specs & Features
1/10 R / C assembly model kit.
The polycarbonate body depicts the street version 240Z. (Light pod parts included.)
Short wheelbase: 251mm.
24mm medium narrow silver metal-plated wheels (offset +2) are included.
Super Driftech tires (24mm width) included.
Based on the TT-01D Type-E Chassis.
4WD shaft driven bathtub chassis with 4-wheel independent double wishbone suspension and sealed front and rear differential gearboxes.
Drift spec modifications include tuned suspension, RS-540 sport-tuned motor, aluminum heat sink, CVA mini shock dampers (Super Mini), and adjustable upper arms.
LEDs to depict headlights (white) and Taillights (red) are included.
A wide variety of Option Parts are separately available to further customize your machine.
ELECTRIC KITS require:
(unless stated differently above)
2-Channel Radio Systems
recommand using
Futaba 2PHKA AM 2-Channel w/R162JE w/S3003 x 2 - 27MHz transmitter set, or
Futaba 2PL 2.4GHz transmitter w/R603GF set (Servo required seperately)
Stick Pack (A / C / DC Charger)
7.2V 6-Cell Battery
8 AA Batteries (For Transmitter)
PS Paints
Tools



Henglong 1:10 LIGHTNING RTR


HARGA 1.100.000


Specification:
* Full Function Radio Controlled
* Forward, Reverse, Stop, Left & Right Steering 4WD Electrodynamics Tele-control Vehicle.
* Assembled Aluminum Chassis
* Trigger Gun 120 LCD Electron Speed ​​Controller
* Polycarbonate Frame Type monologue
* Front and Rear Double Wishbone Suspension
* 4 Wheel Shaft-Drive System
* Coil Spring damped Suspension System
* Racing Radial Tries and Wheels
* High Performance RC-550 Type Electric Motor
* Highly Detailed Polycarbonate Body Shell
* Form Bumper Front and Rear
* Aluminum alloy chassis
* Antiskid and abrasion proof rubber tire
* Full ball bearings used through the car
* Liquid crystal numeral shown controlled
* Dimension:
* Speed: up to 30km / h on standard system
* Gear Ratio
* Car Weight:



HSP Xeme Electric Powered 1/10 On Road RC 



HARGA 1.000.000 
Features:

1.Aluminum center drive joint
2.Powerful 540 motors
3.long body posts with clip holes for adjusting body level
4.Extra large foam bumper Protects against Impacts
5.High precise ESC
6.Extra large anodized aluminum radio tray
7.Oil filled full aluminum capped shocks
Specification:
Wheelbase: 260mm
Track: 195mm (F / R)
Ground clearance: 4.5mm
Gear ratio: 6.25:1
Diameter / width of wheel: 65/26mm
Weight: 1330gBattery


HSP Xeme PRO 1:10 Electric 4WD RC RTR



HARGA 1.100.000

High Speed ​​1/10th scale 4WD Electric power Pro Version On-Road Touring Car is equiped with superior accessories.it have enjoyed a high reputation in the international market for the skillful design and reliable performance. Xeme HSP 94 103 PRO Specification: Wheelbase: 260mm Track: 195mm (F / R) Ground clearance: 4.5mm Gear ratio: 6.25:1 Diameter / width of wheel: 65/26mm Weight: 1330g HSP Xeme 94 103 PRO Features: 1.Aluminum center joint drive 2.Powerful SP03302 brushless motor 3.long body posts with clip holes for adjusting body level 4.Extra large foam bumper Protects against Impacts 5.High precise measurement SP03307 brushless ESC 6.Extra large anodized aluminum radio tray filled full 7.Oil aluminum capped shocks 8.Anti-skid on road tires and chrome sprayed wheel rims This package includes: 1. 2-Ch 27MHz AM Transmitter 2. 100% Pre-assembled Car 3. Battery Charger (Suitable for Your Country's standard) 4. 7.2V 2000mAh NiMH Battery



HSP Flying Fish RC Drift 1: 10 RTR



HARGA 1.500.000

SPEC :
1.Four wheel drive system
2.Excellent front / rear camber and toe-in setup
3.Powerful rc motors 540
4.Anodized aluminum center long drive shaft
5.High performance front / rear differentials
6.Stable suspension arms & solid front / rear shock tower
7.Oil filled aluminum capped shocks
8.Precise steering fitting delivers quick response.
9.High precision SP03018 electronic speed control (ESC)
10.Complete ball bearings for a smooth and an efficient drive
11.High performance anti-skid drift tires, chrome plated spoke rims & pre-mound drift wheels
12.7.2V 1800mAh Ni-MH battery power
13.Extra large front bumper foam provides protection against sudden Impacts.
1: 10th scale ready to run on-road drift car




HSP DRIFT  FF Toyota Soarer 1/10 



HARGA 1.500.000

Description :
1/10 ELECTRIC RC DRIFT CAR:
HSP 1/10 Scale Electric 4WD Drift Car
100% Ready To Run
4 Wheel Drive
Shaft Drive
Front and Rear Ball Differentials raced
High Discharge 1800mAh 7.2 V NiCad Battery and Charger
Upgraded RC 540 Race Motor
Light Weight Alloy Drive Shaft
Light Weight Aluminum Alloy High Intensity Upper Plate
Front and Rear Differentials with Bevel Gears
Full 4 Wheel A-Arm 100% independent Adjustable Suspension
Aluminium Cap Oil Filled Adjustable Shock Absorbers
Adjustable Height
Adjustable Camber
Adjustable Toe In, Toe Out
New Even Lighter Smaller Front and Gear Boxes
HSP Driftech Low Profile Tyres
3 Way Electronic Speed ​​Controller with Brake and Reverse
Factory Installed Servo Saver
2 Channel Pistol Grip Radio Factory Installed



HPI DRIFT SPRINT2 body CHEVROLET 1/10 RTR






HARGA 1.700.000

Features:
High quality HPI SC-15 Reversible ESC.
Officially licensed Rays / Volk TE37 wheels are chrome plated. 6mm offset rear wheels fill out the fenders and give the wheels the wide look seen on full-size drift cars.
Hard compound Type A drift tires for controllable drifting with realistic looks and aggressive tread pattern.
Foam bumper Protects the car from Potentially damaging Impacts.
Adjustable rear body posts allow you to mount a variety of different bodies without trimming or replacing the posts.
Fine tune your suspension with adjustable turnbuckles.
Complete set of ball bearings for a smooth and efficient drivetrain.
Oil-filled coil-over shock absorbers with specially chosen springs for drifting.
2 degree and 3 degree rear hubs for additional tuning choices.
Durable injected molded nylon chassis play.
Front and rear shock towers with optimized shock absorber and camber link positions for ideal suspension geometry.
Optional low profile front shock tower is included in the kit roomates Allows the use of the full range of HPI 190mm bodies.
Droop screws allow you to "race tune" your suspension settings.
Precise bellcrank steering.

Specifications:
Length 17 (431mm)
Height 5 (127mm)
Width 7.5 (190mm)
Wheelbase 10 "(254mm)
SPRINT 2 DRIFT
Includes clear bodyshell and comprehensive instructions manual.